Platan Proxima - Two Outside Parties - One Extension User Conference

Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
60
4.3.4 Two outside parties – one extension user conference
If you are having a telephone conversation with an outside party, you may open a
conference with another trunk line, e.g. with the mobile phone of an employee
staying outside the company's premises. A conference call with a trunk line is rated
as any other outgoing call. The user opening a conference call must be authorised
in the computer program to use the access number and to transfer calls (menu:
Extensions → Service classes).
If you are having a telephone conversation with an outside party and you wish to
open a conference with another outside party (at the expense of your server):
Press FLASH or symbol set as FLASH for IP phone or external port
equipment. You will hear a continuation tone.
Dial your own extension number – TEL.
Hang up the phone. Your party has been put on hold – HOLD.
Pick up the phone.
Select another trunk line, e.g. 0 or *80*a*b*c, and dial the number of the
outside party you want to include in the conference.
When the called party answers, press FLASH or symbol set as FLASH
for IP phone or external port equipment. You will hear a continuation
tone.
Enter the Access number (it is a security code defined in the computer
program): Common settings → Calls. This number must differ from
those listed in the numbering plan for users, the Hunt Group, etc.).
The server has established a conference.
If an internal user participates in the conference, the talktime is unlimited. If the
call is held without the participation of an internal user, its duration will equal the
time predetermined in the computer program with the possibility of prolonging it.