Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
where XX stands for the number ascribed to the terminal in the computer
program.
MESSAGES DISPLAYED DURING AN OUTGOING CALL
When the called party picks up the phone, the proprietary phone activates the
call timer. Information about the call duration is displayed:
When the booked connection with the most recent (*92 function) or with any
(*94 function) external number is being established, the display shows the
following message:
When you dial the number, the dialled digits are displayed one by one. This
option makes it possible to ensure that the dialled number is correct.
5.1.6 Programming buttons and LEDs using the telephone
The server allows the individual programming:
– of direct dialling buttons:
CO1÷CO24 in the case of the proprietary phone and S1÷S60 in the case of the
console (Libra only).
– of direct dialling button LEDs (BLF).
Thanks to this function, you can quickly access both trunk and extension lines from
the proprietary phone or from the console. Apart from that, it provides visualisation
of the line engagement status and a single-button access to the selected functions
described above.
PROGRAMMING COn and Sn DIRECT DIALLING BUTTONS
AND THEIR LEDs
All COn and Sn buttons of a proprietary phone and console may be ascribed to
either trunk (CO) or extension (user) lines. The same applies to LEDs next to each
button.
To Next Page
Loading...