Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
In order to operate the server properly, please read this manual carefully and keep
it for future reference. The Proxima/Proxima plus IP PBX Server and LIBRA PBX
Server manuals are organised as follows:
Part 1 – Proxima or Libra server operation and maintenance manual covering the
following issues:
important features of the server;
structure and installation procedure of the server.
Part 2 – joint user manual covering the following issues:
functions and services provided by the server, divided into incoming
and outgoing calls;
programming some server functions using the telephone;
operating proprietary phones, consoles and door phones;
built-in voicemail;
The majority of server functions are listed at the end of this manual in a
shortened version.
Part 3 – ProximaWeb/LibraWeb program operation manual covering the issues
concerning the program operation and the server programming using a
PC.
The server is accompanied with a hard copy of a Quick Start manual. User manual
of Proxima/Proxima plus IP PBX Server and Libra PBX Server can be found on
our website (Files tab):
http://www.platan.eu/offer/ip-pbx-telephone-systems/libra.html
http://www.platan.eu/offer/ip-pbx-telephone-systems/proxima.html
http://www.platan.eu/offer/ip-pbx-telephone-systems/proxima-plus.html
The server may be programmed by an authorised person only.
We also invite you to visit our website www.platan.eu, where information on new
products and changes can be found.
1.1. Server programming
The server can be set up only by an authorised person using the ProximaWeb,
LibraWeb or the LibraPC program.
Operation guidelines and the description of the server programming can be found
in the ProximaWeb and LibraWeb Program Operation Manual provided as part of
the server documentation.
Some of the server functions may be programmed using the telephone via
a dedicated Programming mode.
To Next Page
Loading...