Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
The server will switch off the automatic change of operation modes and will starts
working in the last operation mode set.
Hang up the phone.
If you want to switch on the automatic change of server operation modes:
Pick up the phone. You will hear a dialling tone.
Dial
The server will switch on the automatic change of operation modes and will start
working according to the modes defined in the computer program.
Hang up the phone.
You may “manually” return (switch over) to the mode currently active in the
program by entering the number of this mode. The server will change the mode
automatically according to the times programmed in the computer program.
To Next Page
Loading...