Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
Answering calls automatically
When the phone is hung up – if the AUTO ANSWER button is pushed in, a calling
extension user and an outside party will be automatically switched to the
speakerphone (after 1 ringtone). This function is active until cancelled. In order to
deactivate it, the same key must be pushed again. If active, the AUTO ANSWER
key flashes red.
Mute – one way sound off
When the phone is picked up or the speakerphone is on – its role is to switch off
the transmission using the proprietary phone to the user with whom a conversation
is held (switching off the microphone). You can hear the other person but this
person cannot hear you. Pressing this button again restores the two-way
communication.
Switching the speakerphone on/off.
Makes it possible to hold a conversation without picking up the phone.
1. The phone is hung up: when the phone rings, you switch on the speakerphone by
pressing this button. To switch the call to the receiver, you must pick it up. If the
receiver is not picked up, the speakerphone will be switched off and the call ended
after the SP-PHONE key has been pressed again.
2. During a call: pressing this key transfers the call from the telephone receiver
onto the speakerphone.
If the speakerphone is activated, the SP-PHONE button is backlit red.
If you tick the Auto pick up in the computer program option (menu: Extensions
Privileges / Proprietary), the speakerphone is switched on automatically when the
speed dialling button is pressed.
Additional proprietary phone settings
When the phone is hung up, in a standby mode:
Adjusting the proprietary phone LCD contrast.
When the phone is hung up and is ringing:
Used to adjust the volume of the proprietary phone ringtone.
NAVIGATOR KEY KNOB
To Next Page
Loading...