Plustek SmartOffice PS286 Plus - Part I Introduction; Part II Scanner Connection

Scanner Utility Help2
All Rights Reserved.
1
Introduction
The main functions of Scanner Utility are:
scanner connection
checking and
standby mode
control
.
The Scanner Utility program checks to make sure that the scanner software is
properly installed, and the connection between the scanner and computer is
working.
Furthermore, the program allows you to
disable the standby mode
, or define an
idle time for the
scanner to automatically enter the standby mode
.
2
Scanner Connection
The icon
, located on the Windows system tray, indicates if the scanner
software is properly launched and the scanner and computer are
communicating with each other.
The program has been successfully
launched and the scanner is connected with
the computer, ready to scan images.
The scanner is not connected with the
computer.
Or, the scanner power is not
switched on. Or, the scanner is in standby
mode.
No Display
You have chosen to terminate the program,
no matter the scanner is connected or
disconnected with the computer.