MacAction Help26
All rights are reserved.
2.6.1
Add/Modify Linked Application dialog box
Within the Button Configuration window click the
icon on the left pane and
in the right pane, which opens this dialog
The items and parameters available in the window are explained as follows:
to browse to the desired program folder and select the executable file
(*.exe) of the desired application program. The application is displayed here
with its full file path and execution file name.
Enter the name for the newly-added application program. The name can be
short like a nickname or even in more words including complete software name
and its vendor name; that is, write anything that can help you recognize this
This name will be displayed in the Application's drop-down menu in the Button
a short description here.
and add %1 at the end of the command line
specific task if you have such information for the selected application
program. It is recommended that you leave this field blank if you will not use or
are unsure of the command line.
To Next Page
Loading...
