Plustek SmartOffice PS286 Plus - How to Create Searchable PDF Documents by Macaction Program

MacAction Help52
All rights are reserved.
There are three ways to view the button settings:
·
Double-click the icon
in
Finder
>
Applications
>
Plustek
>
Your
scanner model name
.
·
Click the icon
in the Dock.
·
Right-click
the icon
in the Dock, and then choose
Button
Configuration...
in the pop-up menu that opens.
Scan from the
On-screen
Mac
Action's Execute Menu
You may also use
Mac
Action's on-screen Execute menu to perform the same
scanning tasks.
The
Mac
Action program provides a quick and convenient way to
perform various scanning functions.
Follow the steps described below:
1.
Place the document or images onto the scanner.
2
.
Check current button settings by viewing the Button Configuration window. If
needed, you may also modify settings to meet your current needs.
3.
Right-click the
icon
in
the Dock, and then choose
Execute
in the pop-up
menu that opens.
4
.
Click the desired button function item in the pop-up menu.
The scanner starts to scan immediately and carry out the corresponding action
according to settings you have set up in the Button Configuration window.
Also see:
Configure Button Settings
3.3
How to create searchable PDF documents by MacAction
program?
Scan from the PDF Button
1.
Do one of the following to open the Button Configuration window: