MacAction Help48
All rights are reserved.
Let the scanner continue to scan.
Let the scanner stop scanning. Make sure to clear the paper
path and restart scanning.
Tick the check box if you want MacAction to detect the document length. You may
set the length of the document. If the scanner detects a document equal or longer
than that length, it will be determined as a multifeed.
By clicking on the Preview button, you can scan the source document into the
Action interface. Documents or images that are
previewed will be displayed here. The previewed image gives you an idea of
how a document or image will look after it is scanned.
Clicking the Default button on the lower right corner
revert the settings to its
original values and discard all adjustments you have made.
2.10
File Format Configuration dialog box
Within the Button Configuration window click the
on the left pane and then click
in the right pane, which opens this
The items and parameters available in the window are explained as follows:
Keep the same image quality level for all modes
Ticking this check box will unify the quality level for all scan modes, thus saving
you the trouble of adjusting the quality level individually. If you prefer to
manually adjust the image quality level for different modes, leave this check box
Keep the same PDF setting for all modes
Ticking this check box will unify the PDF setting for all scan modes, thus saving
you the trouble of individually ticking or clearing the PDF check box. If you
prefer different settings for different scan modes, leave this check box cleared.
To Next Page
Loading...
