2
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
2.47
SKAG REPLACEMENT
NOTICE
Always replace ski skags in pairs.
1. Raise and support the front of the snowmobile so the
skis are approximately 6 in (15.2 cm) from the
ground.
2. Remove the attaching nuts
q
and pry the skag
w
downward.
3. Reverse the steps to install a skag. Tighten nuts to
specification.
TORQUE
Ski Skag Nuts:
8 ft-lbs (11 N·m)
MAINTENANCE
To Next Page
Loading...
