10.32
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
ENGINE COOLANT TEMPERATURE (ECT) SENSOR HARNESS ROUTING
1. The ECT sensor
q
is secured to the cylinder head.
2. The ECT sensor jumper harness should route upward. Connect the ECT jumper harness connector
e
to the main
harness connector.
NOTICE
Ensure the ECT sensor jumper harness slack is secured with a panduit strap
w
as shown.
IMPORTANT
ECT IS GLUED TO JUMPER HARNESS CONNECTOR! DO NOT ATTEMPT TO SEPARATE THE ECT FROM THE
JUMPER HARNESS.
BATTERY / ELECTRICAL
To Next Page
Loading...
