Polaris 850 MATRYX INDY XC 129 2021

10.56
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
7. Remove the top two display fasteners
s
and remove
the display
d
.
7S DISPLAY INSTALLATION
1. Install the display
q
onto the display door using the
top two display fasteners
w
. Torque fasteners to
specification.
TORQUE
Display Fasteners:
53 in-lbs (6 N·m)
2. Connect the USB connector
e
, display connector
r
,
V2V/antenna connector
t
, and GPS antenna
connector
y
into the display.
3. Position the display wire cover near the display/ door.
Route USB cable and secure the USB port
u
in the
display wire cover clamp.
NOTICE
Make sure the USB cable in not pinched between the
display wire cover and the back of the display door.
BATTERY / ELECTRICAL