8
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
8.65
SHOCK LOCATIONS
q
Rear Track Shock
e
Front IFS Shock
w
Front Track Shock
SHOCK COMPRESSION DAMPING
The primary adjustment for overall vehicle balance is torsion spring preload. Perform this adjustment first. After
adjusting torsion spring preload to your satisfaction, compression damping adjustments can be made to control ride
quality and bottoming resistance.
Compression damping can be adjusted at the front suspension and at the front and rear track shock. Make
adjustments in increments, then test ride. When adjusting the front suspension, always adjust both clickers equally.
To stop bottoming of the front or rear suspension (stiffer ride), rotate the clicker(s) clockwise two clicks (as viewed from
the top of the clicker), then test ride. Repeat the adjustment until bottoming stops and the desired ride quality is
achieved.
For a more plush ride at the front or rear suspension, rotate the clicker(s) counter-clockwise two clicks, then test ride.
Repeat the adjustment until the desired ride quality is achieved.
STEERING / SUSPENSIONS
To Next Page
Loading...
