Polaris 850 MATRYX INDY XC 129 2021

3
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
3.141
3. Install the edge clip
w
retaining the wiring harness to
the intake plenum.
4. Install the push rivets
q
retaining the intake tube to
the intake plenum.
5. Install the console. See Console Installation page
9.25.
6. Install the hood and side panels.
AIR INTAKE TUBE REMOVAL
1. Remove the side panels and hood.
2. Remove the cable tie
q
securing the upper intake
tube to the chassis
3. Remove the fastener
w
retaining the lower intake
tube.
4. Remove the push rivets
e
retaining the intake tube to
the intake plenum.
5. Remove the diagnostic connector from the cap.
ENGINE / COOLING / EXHAUST