Polaris 850 MATRYX INDY XC 129 2021

3
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
3.43
23.Carefully install the air box
3)
back into the
snowmobile.
24.Torque gear clamps
2(
to specification.
TORQUE
Air Box to Throttle Body Gear Clamps:
11 in-lbs (1.24 N·m)
NOTICE
If the ignition coils were removed, reinstall the ignition
coils and torque fasteners to specification.
TORQUE
Air Box Coil Fasteners:
36 in-lbs (4 N·m)
25.Install new cable tie on air box routing clip
2*
to
secure the stator wiring harness and throttle cable.
26.Connect the T-MAP Sensor
2&
to the wiring harness
and install new cable tie
2^
to secure wiring.
27.Install the PBR and fasteners
2%
. Torque fasteners to
specification.
TORQUE
PBR Fasteners:
6 ft-lbs (8 N·m)
ENGINE / COOLING / EXHAUST