3.46
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
38.Install the diagnostic connector
d
into the cap.
39.Install the cable tie
s
securing the upper intake tube
to the chassis.
40.Install the push rivets
a
retaining the intake tube to
the intake plenum.
41.Slide the front of the clutch guard
o
into the body
work. Install the fasteners
i
at the rear of the clutch
guard.
TORQUE
Clutch Guard Nuts:
8 ft-lbs (10 N·m)
42.Install the oil tank
u
by quickly installing the oil line
t
onto the fitting
y
.
NOTICE
Place a rag under the fitting to catch any spilled oil.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
