3.56
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
The sealant bead should be patted down or smeared using a finger to flatten the bead but must be biased toward the
outer edges of the case mating surface. The desired sealant coverage is when a very thin layer of sealant is covering
the entire mating surface with ZERO sealant near the inner edges of the water pump cross shaft gallery (between the
two seal grooves)
q
.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
