8192 = 100% maximum range of AI
Status of the three comparators.
40232 C1
40233 C2
40234 C3
Drive status before occurring the fault
0 to 17 (See fault message list)
Speed reference in local mode.
PID setpoint in local mode.
Speed value assigned to Multi-reference 1.
Speed value assigned to Multi-reference 2.
Speed value assigned to Multi-reference 3.
Speed value assigned to Multi-reference 4.
Speed value assigned to Multi-reference 5.
Speed value assigned to Multi-reference 6.
Speed value assigned to Multi-reference 7.
LOCAL manual speed reference.
Local setpoint 1 of PID. Multi-reference 1.
Local setpoint 2 of PID. Multi-reference 2.
Local setpoint 3 of PID. Multi-reference 3.
Local setpoint 4 of PID. Multi-reference 4.
Local setpoint 5 of PID. Multi-reference 5.
Local setpoint 6 of PID. Multi-reference 6.
Local setpoint 7 of PID. Multi-reference 7.
Local setpoint 8 of PID. Multi-reference 8.
It shows the resting time in minutes for the
automatic stopping of the system.
Reset level for the flow control algorithm.
Flow level to sleep the drive.
Total time during which the drive is running
(RUN).
40550 Days
40551 Hours
Days Real value = Modbus value
Hours 1 = 0.1 hours
Partial time during which the drive is running
(RUN).
40552 Days
40553 Hours
Days Real value = Modbus value
Hours 1 = 0.1 hours
To reset the counter of partial time for running
status (RUN).
Total drive energy counter in kW
Total drive energy counter in MW
Total drive energy counter in GW
Partial drive energy counter in kW
Partial drive energy counter in MW
Partial drive energy counter in GW
Partial drive energy counter reset
To Next Page
Loading...
Need help?
General
