Technical Information
120
POWER STEERING RESERVOIR
Use Dexron III/VI automatic transmission fluid
for this system.
PRE-HEATING SYSTEM
Depending on options chosen, a coolant heater
may be installed on the coolant circuit. The
heater can be used as a pre-heater or as an
auxiliary heat source.
Only the Webasto 104,000 Btu preheater is
available. The heater is controlled by a
programmable timer. See Other Features
chapter for information on how to use the timer.
WEBASTO
Model Thermo 300
Heating output
104,000 Btu/hr
(30 kW)
Fuel type Same as engine
Fuel consumption
4.8 US qts/hr
(4.5 l/hr)
Rated voltage 24 V DC
Operating voltage 20-28 V DC
Electric power consumption
without water pump
110 watts
Dimensions (L)
Inch (mm) (W)
(H)
24.01 (610 mm)
9.69 (246 mm)
8.66 (220 mm)
Weight lb (kg) 41.88 (19)
To Next Page
Loading...
