Technical Information
146
• Material and parts conform to ASTM and/or
SAE standards in effect at the time of
manufacture.
• All factory-installed interior materials meet
FMVSS 302 for fire resistance.
• Certified according to Provincial, State and
Federal Safety standards (Canadian and
US) BMCSS, FMVSS and CMVSS.
• Other applicable certification labels are
affixed to the component.
DOT CERTIFICATION PLATE
This certifies that vehicles manufactured by
Prevost Car Inc. comply with all Federal Motor
Vehicle Safety Standards at the time of
manufacture. Information such as date of
manufacture, model year, gross vehicle weight
rating, tire types and inflation pressure is also
etched on this plate. The DOT Certification
plate is affixed to L.H. control panel.
DOT CERTIFICATION PLATE 00016
EPA ENGINE LABEL
The emissions certification label affixed inside
the engine compartment above the lavatory
maintenance service valves certifies that the
engine conforms to federal and any state
exhaust emissions regulations.
VEHICLE IDENTIFICATION NUMBER
(VIN)
VEHICLE IDENTIFICATION NUMBER 00044
The Vehicle Identification Number is stamped on
a plate located on the windshield frame pillar
(driver's side). The VIN is visible from the
outside of the vehicle. Make sure the correct
vehicle identification number is given when
ordering replacement parts. Using the VIN when
ordering parts will facilitate processing.
NOTE
Record the VIN in the vehicle documentation
and keep with company records. The VIN will
normally be used for vehicle registration,
service reference needs and for obtaining
vehicle insurance coverage.
COACH FINAL RECORD
The Coach Final Record is a record of all data
pertaining to the assembly of the vehicle. This
record is included in the technical publications
package supplied with the vehicle. Retain this
record in the company records office for
reference and safe-keeping.
To Next Page
Loading...
Need help?
General