PREVOST X3-45 - System Diagnostic Menu

Other Features
62
06386
Setting Night Display
Night display, when activated, shows all displays
in negative when the headlights are ON.
1. In SET-UP MODE, highlight NIGHT
DISPLAY using the arrow keys;
2. Press the enter key (
);
3. Highlight the desired display using the arrow
keys;
4. Press enter key (
) to confirm.
The MCD returns to SET UP MODE.
06400
Setting Default Language
This feature is enabled when the correct
password is entered (see PASSWORD INPUT).
1. In SET UP MODE, highlight DEFAULT
LANGUAGE using the arrow keys;
2. Press the enter key (
);
3. Highlight the desired language using the
arrow keys;
4. Press enter key (
) to confirm.
The MCD returns to SET UP MODE.
Setting Fleet Fuel Target
This feature is enabled when the correct
password is entered (see PASSWORD INPUT).
1. In SET UP MODE, highlight FLEET FUEL
TARGET using the arrow keys;
2. Press the enter key (
);
3. Using the arrow keys set the highlighted
digit;
4. Press enter key to confirm, the following
digit is highlighted. Set as in step three;
5. When last digit is set, press the enter key
(
) to confirm new target.
The MCD returns to SET UP MODE.
06396
Setting the Odometer
This feature is disabled.
SYSTEM DIAGNOSTIC MENU
System Diagnostic menu allows the driver to
request diagnostics from the ECM or ECU of
components such as the engine, ABS brakes
and other instruments. The driver can also
perform a cluster self test and read data about
the ECm or ECU.
Enter diagnostic mode by using the arrow keys
to highlight SYSTEM DIAGNOSTIC, then
pressing the enter key to confirm.