Chapter 3: Management with the Promise Utility
27
Managing Subsystems
Enclosure management includes the following functions:
• Viewing the Subsystem Information (page 27)
• Viewing Temperature Sensor Information (page 27)
• Locating a Subsystem (page 28)
Viewing the Subsystem Information
To access subsystem information:
1. Do one of the following actions,
• Click the Dashboard icon, then click the Controller link.
• From the Device menu, choose Component List.
2. Mouse-over and click the Subsystem, then click the View button.
Subsystem information includes:
•Enclosure ID
• Enclosure Type
• Enclosure Warning Temperature Threshold *
• Enclosure Critical Temperature Threshold *
• Controller Warning Temperature Threshold *
• Controller Critical Temperature Threshold *
• Max Number of Controllers
• Max Number of Physical Drive Slots
• Max Number of Fans
• Max Number of Blowers
• Max Number of Temperature Sensors
• Max Number of Power Supply Units
• Max Number of Voltage Sensors
Items with an asterisk (*) are adjustable under “Locating a Subsystem” on
page 28.
3. Click the X icon to close the information panel.
Viewing Temperature Sensor Information
To view the status of the temperature sensor:
1. Do one of the following actions,
• Click the Dashboard icon, then click the Controller link.
• From the Device menu, choose Component List.
To Next Page
Loading...
Need help?
General
