Pegasus R6, R4 Product Manual
44
Running Media Patrol on your Physical Drives
Media Patrol is a routine maintenance procedure that checks the magnetic media
on each disk drive. Media Patrol checks are enabled by default on all disk arrays
and spare drives. Media Patrol is concerned with the media itself, not the data
recorded on the media. If Media Patrol encounters a critical error, it triggers PDM
if PDM is enabled on the disk array. Media Patrol checks all physical drives one
at a time.
To run Media Patrol on your physical drives:
1. From the Admin menu, choose Background Activities.
The list of background activities appears.
2. Mouse-over Media Patrol and click the Start button.
Pausing and Resuming a Media Patrol
To pause or resume a Media Patrol:
1. From the Admin menu, choose Background Activities.
The list of background activities appears.
2. Mouse-over Media Patrol and click the Pause or Resume button.
Stopping a a Media Patrol
To stop is to cancel the Media Patrol:
1. From the Admin menu, choose Background Activities.
The list of background activities appears.
2. Mouse-over Media Patrol and click the Stop button.
3. In the Confirmation box, type the word “confirm” in the field provided and
click the Confirm button.
To Next Page
Loading...
Need help?
General
