M350 Series User Manual 116
(0 ~ 32767); 0: keep alive not set.
11.4 PPTP Server
This section provides 2 sub configurations, including General Configuration and Clients
Configuration.
(1) General Configuration
(2) Clients Configuration
There are two parts for Clients configuration.
Summary part: User can delete and edit the existed PPTP clients.
Add/Edit part:
VPN > PPTP Server> General
Select from Off or On to enable PPTP Server.
IP addresses to be used at the local end of the tunneled PPP links
between the server and the client.
A list of IP addresses to assign to remote PPTP clients.
VPN > PPTP Server > Clients
Select from Off or On to set the client setting.
The username of this client.
The password of this client.