Proscend M350 Series User Manual

M350 Series User Manual 32
5.4 Alarm
This section allows you to configure the alarm.
Note:
(1) If you select SMS in Alarm input/output, you need to add the trust phone number into Contracts/
On Duty.
(2) If you select SNMP trap in Alarm output, you need to set up SNMP trap configuration from
Service SNMP.
(3) If you select E-Mail in Alarm output, you need to set up SMTP configuration from Service SMTP.
(4) If you select TR069 in Alarm output, you need to set up TR069 configuration from Service
TR069.
System > Alarm
Item
Description
Mode
Turn on/off the Alarm configuration. Select from Disable or Enable. The default is
Enable.
Alarm Input
 SMS: It means on duty team members on Contacts / On Duty can send SMS
to the phone number of using SIM card to trigger alarm.
 DI: IO to trigger alarm.
 VPN disconnect: All tunnels get disconnected then trigger alarm.
 WAN disconnect: WAN connections get disconnected then trigger alarm.
 LAN disconnect: LAN connection get disconnected then trigger alarm.
 Reboot: Reboot then trigger alarm.
Alarm
Output
Select from SMS, DO, SNMP trap, E-mail and TR069 as alarm output.

Proscend M350 Series Specifications

General

Brand	Proscend
Model	M350 Series
Category	Network Router
Language	English