M350 Series User Manual 155
14.2 Administration
This section allows you to set up the name of the device and change your new password. For the
Session TTL, you can set up what duration of time will be logout. If you don’t need to have this
timeout limitation, you can fill in “0“(Zero). The default timeout is 5 minutes.
For different users’ authority, you can set up each level and password from this section.
(1) Super User can set User 1,2 and 3 and give them different level authority:
Level Administrator – can see and can apply each function except super user’s password.
Level Read Only – only can see the current configuration of each function.
(2) Non-super user can only edit his/her password.
To Next Page
Loading...
