M350 Series User Manual 5
1 Introduction
Proscend M350 is a series of Industrial Cellular Routers
enabling reliable, secured broadband communications
over fixed-line and 5G, 4G LTE cellular networks. With
the capability of connecting multiple wired and wireless
networks, as well as built-in load balancing feature, plus
its sophisticated industrial design, the M350 Series
broadens its service scopes cove ring not only
conventional smart city and Industrial applications, but
also FWA for medium business segments requiring
non-stop Internet connectivity. The optional M350
models serve more local network varieties or hotspot
applications, with built-in Wi-Fi Access Point supporting
802.11b/g/n/ac standards on selectable 2.4GHz/5GHz
radio bands.
As of broadband wireless evolution, devices performing at network edge must be future-proven
along with Telco’s infrastructure migration to next generation, also sustain the good user
experiences on legacy infrastructure. The modular design of M350 Series strengthens the feasibility
of deriving more product variety with unified software suite and enables the network edge to
continuously achieve Industrial IoT by seamlessly migrating from 3G, 4G LTE CAT6 to 5G FR1
cellular broadband, with optimum bandwidth and cost performance.
1.1 Features
Support multiple band connectivity with 5G NR / FDD LTE / TDD LTE / WCDMA
Dual-SIM design for connecting to two service providers
Failover between multiple WAN connectivity for network resilience
Load balancing to optimize throughput performance between Cellular and Ethernet WAN
Support IPv6/IPv4 dual stack
Support MQTT for IIoT
Industrial design for operation in harsh environments
Gigabit on all Ethernet WAN and LAN interfaces
VPN for enhanced security
GPS tracking and report
Support 802.11ac Wi-Fi AP with selectable 2.4GHz/5GHz radio bands (M350-W5G, M350-W6 only)
To Next Page
Loading...
Need help?
General
