M350 Series User Manual 63
Reference Signal Received Power.
Reference Signal Received Quality.
The value of SINR(Signal to Interference plus Noise Ratio).
The Received Signal Code Power Level of the cell that was scanned.
Carrier to noise ratio in dB = measured Ec/lo value in dB.
eNB ID (20 Bits) + Cell ID (8 Bits).
The E-UTRA-ARFCN of the cell that was scanned.
Received Signal Strength Indication.
7.9 Lock LTE PCIs
This section allows you to set Lock PCIs. It includes Neighbors, Locked PCIs, Saved Locked PCIs.
(1) Neighbors
To Next Page
Loading...
Need help?
General
