Proscend M350 Series - DMZ Configuration; Management IP Address Configuration

M350 Series User Manual 124
Firewall> Port Forwarding
Item
Description
Mode
Turn on/off Port Forwarding to select Disable or Enable. The
default is Disable.
Description
Descript the name of Port Forwarding.
Protocol
Select from UDP or TCP Client which depends on the application.
Source Port Begin
Fill in the beginning of source port.
Source Port End
Fill in the end of source port.
Destination IP
Fill in the current private destination IP.
Destination Port Begin
Fill in the beginning of private destination port.
Destination Port End
Fill in the end of private destination port.
12.3 DMZ
This section allows you to set the DMZ configuration.
12.4 Management IP
This section allows you to set the management IP address to access the router.
Firewall > Management IP
Item
Description
Management IP Address
Only listed IP address can access the router. 0.0.0.0 means any IP
Firewall> DMZ
Item
Description
Mode
Select from Disable or Enable. The default is Disable.
Host IP Address
Fill in your Host IP Address.