M350 Series User Manual 210
Result:PC-A sends ICMP packet to Router-1 LAN and WAN IP and they should have response.
Example 2: Add IP Routing on WAN interface
Step1: The cellular router for Static Route configuration
The Mode is on at the settingssection and add the routing.
Step2: Router-2 configuration is as below.
(1) Login to the Router-2 web site, and then "NAT disable".
(2) Configure LAN IP: 192.168.20.1
(3) Configure WAN IP: 192.168.2.2
To Next Page
Loading...
