M350 Series User Manual 76
RIP (Routing Information Protocol, RFC 2453) is an Interior Gateway Protocol (IGP) and is
commonly used in internal networks. It allows a router to exchange its routing information
automatically with other routers, and allows it to dynamically adjust its routing tables and adapt to
changes in the network.
Select from Off or On to open or close RIP function.
Redistribute local routes
Select from Off or On to open or close redistribute local routes.
Redistribute connected
routes
Select from Off or On to open or close redistribute connected
routes.
Select from Off or On to open or close redistribute OSPF routes.
Select from Off or On to open or close redistribute BGP routes.
To Next Page
Loading...
Need help?
General
