Proscend M350 Series - Page 95

M350 Series User Manual 95
This section provides the authentication ID set to authenticate the IPsec connections.
In the default setting, the list of authentication ID is empty.You can create the new authentication ID
by click + Add Authentication ID button.
Note: Please apply the changes before editing the connection settings.
VPN>IPsec> Connections> Advance Setting
Item
Description
DPD interval
The period time interval to detect dead peers.
The default is 30 seconds.
DPD retry
The max number of retry of dead peer detection.
The default is 5 times.
11.2.2 IPsec>Authentication IDs
VPN>IPsec> Authentication IDs
Item
Description
ID
The identification for authentication.
It only work on PSK type.
Type
Select from PSK or RSA. The default is PSK.
 PSK: Use the pre-shared key to authenticate the connection.
 RSA: Use the certificate to authenticate the connection.
Pre-shared Key /
The X.509 certificate for authentication.