quadient MACH 6 - Attach Media Support Wedge Extension; Adjust Rear Media Support Guide;Sled Assembly

SECTION 3
OPERATING PRINTER
38
A
Attach Media Support Wedge Extension
Attach the appropriate Media Support Wedge Extension, if needed, to the Rear Media Support Guide/Sled, as
shown below.
No Media Support Wedge Extension
– For media that is 6” to 17” in length.
Examples:
Letter sized (8.5”x11”) media feeding Short Edge First (SEF)
#9, #10 envelopes feeding SEF
9”x12” envelop feeding SEF
10”x13” envelope feeding SEF
Wide Media Support Wedge Extension [A]
– For media that is 6” to 10.5” in width and 4” to 13” in length.
– For feeding #9, #10 envelopes Long Edge First (LEF)
Narrow Media Support Wedge Extension [B]
– For media that is 3.25” to 6” in width and 4.5” to 13.5” in length.
B