quadient MACH 6 - Printer Status Icon

SECTION 3
OPERATING PRINTER
48
Printer Status Icon
This middle section of the Touchscreen [D] displays a Printer Icon. Within this Printer Icon you will find
additional icons and symbols that represent the current status for the following components:
Ink Valve, Media Sensors, Door Switches, Service Station, Printhead Height and Media Thickness settings.
These icons and symbols can also be used to identify the locations of problems, such where a sensor is blocked
by paper or if a Door is open.
Tip: Tap on a status icon (sensor, valve, Printhead, etc.) to display a description or more details about that item.
- Ink Valve: Shows current status of Ink Valve
(open ink, closed, open air, unknown).
- Sensors & Door Switches: Shows status sensors
(Feeder Sensor, Entry Sensor, Exit Sensor) and
status of door switches (Printhead Door, Ink
Tank Door)
red = blocked/closed
green = unblocked/open
- Service Station: Shows current Service Station position
(wipe, print, cap and unknown).
- Printhead: Shows current Printhead status (primed,
unprimed, unknown/missing).
The number inside the Printhead icon shows the current
Print Height (printhead height) setting.
Range = 1 (lowest) to 9 (highest).
- Media Thickness: Displays the current Media Thickness
setting. Range = 0.1 mm (lowest) to 10 mm (highest)
D