quadient MACH 6 - SECTION 1 - Getting Acquainted; Front View

SECTION 1
GETTING ACQUAINTED
6
SECTION 1 – Getting Acquainted
Front View
1.
Touchscreen Display (Control Panel) – Displays Menu and information about Printer
status. You can set Printer features and control Printer functions from this display.
2.
Printhead Door – Provides access to Print Engine, Printhead and Service Station.
NOTE: All doors must remain shut when printer is busy (printing, performing maintenance).
3.
Soft-Power Button – Used to power-up and power-down the Print Engine.
NOTE: Button illuminates with blue light when Print Engine is powered-up (ON).
4.
Exit Transport Cover – Opens to provide access to media path and Media Transport Belts.
5.
Ink Tank Door – Provides access to Ink Tanks, Waste Ink Tray and Clamshell Latch.
Opening Ink Tank Door disconnects Printer communication to Ink Tanks, allowing for safe Ink
Tank installation/replacement.
NOTE: All doors must remain shut when printer is busy (printing, performing maintenance).
6.
Clamshell – Upper section of Print Engine containing Printhead and Service Station.
Raises up/down based on Media Thickness setting.
To open Clamshell (hinged at rear) and gain access to media path/print area, open Ink Tank
Door
[5]
and release (pull out on) Clamshell Latch
[A]
.
7.
Backup/Transfer Port – Used to backup system/debug log files and stored jobs to a USB
Flash Drive. See “Appendix C – Backup/Transfer Port” for more details.
CAUTION: Do NOT connect devices, other than USB Flash Drives, to this port.
NOTE: This port may NOT be present on all printers.
A
7
6
3
1
5
4
2