quadient MACH 6 - Table of Contents

TABLE OF CONTENTS
3
SAFETY PRECAUTIONS 2
SECTION 1 – Getting Acquainted 6
Front View 6
Entry End & Connections View 7
Print Engine View (Under Printhead Door) 8
Ink Tank View (Behind Ink Tank Door) 9
Print Zone View (Under Clamshell) 10
SECTION 2 – Installing Printer 11
Transport Inspection 12
Tools Needed 12
Choose a Location 12
Operating Conditions 12
Unpacking 13
Contents of Packaging 14
Removing Shipping Materials 15
Install Print Platen & Drip Tray Assembly 16
Attach Media Side Guides and Rear Media Support Guide/Sled 18
Connect Printer 20
Plugging in Printer 20
Connect to Computer 20
Turning Power ON and OFF 20
Install Ink Tanks 21
Install Printhead Cartridge 23
Install Printer Software (Driver & Toolbox) 30
Minimum Comuter System Requirements 30
Connecting Printer via USB 30
Connecting Printer via Network (Ethernet Connection) 33
SECTION 3 – Operating Printer 36
Media Feed Setup 36
Print Zone Reference Tool 36
Position Media Side Guides (Inner and Outer) 37
Adjust Sheet Separators 37
Attach Media Support Wedge Extension 38
Adjust Rear Media Support Guide/Sled Assembly 38
Guide/Sled Positioning Scales & Sled Safety Stop 39
Load Media into Feeder Section (Hopper) 40
Finding the Sweet Spot 40
Position Feeder/Entry Sensor Assembly 41
Adjust Media Thickness 41
Verify “Ignore Exit Sensor” Selection 42
Correcting Misfeeds and Jams in Printer 43
Removing Jammed or Misfed Media 43
Using Printer Touchscreen Display 44
System Status Indicator 45
Job & Maintenance Status 46
Firmware, Date, Time, Relative Humidity Information 47
Printer Status Icon 48
Ink Tank Status 49
Touchscreen Menu Choices and Features 50
Job Menu 50
Stored Jobs 57
Setup Menu 59
Test Print Menu 59
Maintenance Menu 60
Wiper Menu 60
System Test 61