quadient MACH 6 - #10 Envelope, Feeding Short-Edge First

SECTION 4
SOFTWARE SETUP INFORMATION
90
#10 Envelope, Feeding Short-Edge First
TIP: This is the direction a #10 envelope needs to be fed
if you want to print on the full area of the envelope.
1. Open Bulk Mailer.
2. From the “Home” tab, select (double click) on the
“mailing” of your choice.
3. Select the “Print Mail” tab (left side of screen).
4. From the “Print Mail” screen, double-click on the “Print Mail
Wizard” which will guide you through the template (layout) setup
process.
5. When the Welcome screen appears click on Next.
6. The “Print Mail Template Type” window will open.
Select “Envelopes – Graphical Output” and
Click on Next.
7. The “Graphical Envelopes Options” window will open.
Select the “S Series Driver” from the Printer pull-down list.
Then select “Laser or Inkjet”
Click on Next
8. The “Envelope Options” window will open.
Select “#10 Envelope” (4 1/8” H x 9 ½” W) from the list.
Click Next.