SECTION 4
SOFTWARE SETUP INFORMATION
89
19. In the “Mail Print Setup” window select “all pages” or the
range of addresses you want to send to the printer.
IMPORTANT!
If you plan to select “Tray range” and use the “Pause
Between” features, to pause the printer after each
Bundle/Container, please be sure to select “Wait: for user”
and “End print job on pause”.
20. When ready to print, make sure the printer is ready (ON/OFF
button is illuminated), then click on the "Print" button.
Note: The Intelligent Mail Barcode (IMB) will not be
displayed or printed unless you have “cleaned up” the
mailing list using the Address Quality, Address Correction
(CASS) feature in Bulk Mailer. Your Bulk Mailer
subscription must be current for this feature to work.
Please contact BCC Software for additional information. www.bccsoftware.com
To Next Page
Loading...
