SECTION 4
SOFTWARE SETUP INFORMATION
88
14. Add any additional items that you want printed
to the “designer” screen.
Drag and drop the items onto the layout,
wherever you want them to be printed on the
envelope.
Click on Save.
15. Click on the "Go to Preview Mode" icon
, located at the upper left-hand corner of the “designer”
screen. The envelope preview will be displayed.
Note: The Intelligent Mail Barcode (IMB)
will not be displayed or printed unless you
have “cleaned up” the mailing using the
Address Quality, Address Correction (CASS)
feature in Bulk Mailer. Your Bulk Mailer
subscription must be current for this feature to
work.
Tip: If you need to change the layout, Click
on the "Go to Designer Mode" icon
, to
return to the "designer" screen.
16. Click on the printer icon
, to open the "Mail Print Setup"
dialog box.
Make sure the “S Series Driver” is selected as your "Printer".
17. From the “Mail Print Setup” window,
Click on the “Advanced Settings” button.
The “S Series Printer Driver Properties” window will open.
18. From the “S Series Printer Driver Properties” window
Under Media Size select
“Env. Com10 4 1/8 x 9 1/2 in – Landscape”.
Under Orientation select Portrait.
Select your other desired choices
Print Quality, Copies, etc.
Then Click on OK to close this window.
To Next Page
Loading...
