SECTION 3
OPERATING PRINTER
44
Using Printer Touchscreen Display
The Printer's Touchscreen can be used to check Printer status, monitor ink usage, configure network settings, print
test prints, reprint stored jobs, to set media thickness and run maintenance tasks.
NOTE: These functions and more can also be operated remotely from a computer using the Printer Toolbox. See
“Using the Printer Toolbox” following this section.
NOTICE: By default, the Printer Touchscreen will go into a “screen saver mode” (screen goes blank) if the
printer is idle for more than 10 minutes. Tap the screen to wake it up and display the Touchscreen controls.
[A] System Status Indicator
[B] Menu Button – Tap to display a drop-down list of Menu selections
[C] Job & Maintenance Status
[D] Printer Status Icon
[E] Ink Tank Status
[F] Firmware, Date, Time, Relative Humidity Information
[G] Menu Feature Buttons – buttons (features) for currently selected Menu are displayed here
To Next Page
Loading...
