SECTION 4
SOFTWARE SETUP INFORMATION
92
14. Click on the printer icon , to open the "Mail Print Setup"
dialog box.
Make sure the “S Series Driver” is selected as your
"Printer".
15. From the “Mail Print Setup” window,
Click on the “Advanced Settings” button.
The “S Series Printer Driver Properties” window will open
16. From the “S Series Printer Driver Properties” window
Under Media Size select
“Env. Com10 4 1/8 x 9 ½ in - Portrait”.
Under Orientation select Landscape.
Select your other desired choices
Print quality, Copies, etc.
Then Click on OK to close this window.
17. In the “Mail Print Setup” window select “all pages” or the
range of addresses you want to send to the printer.
IMPORTANT!
If you plan to select “Tray range” and use the “Pause
Between” features, to pause the printer after each
Bundle/Container, please be sure to select “Wait: for user”
and “End print job on pause”.
18. When ready to print, make sure the printer is ready
(ON/OFF button is illuminated), then click on the "Print"
button.
Note: The Intelligent Mail Barcode (IMB) will not be
displayed or printed unless you have “cleaned up” the
mailing list using the Address Quality, Address Correction
(CASS) feature in Bulk Mailer. Your Bulk Mailer
subscription must be current for this feature to work.
Please contact BCC Software for additional information. www.bccsoftware.com
To Next Page
Loading...
