QUANTA STRATOS S210 Series S210-X22RQ User Manual

CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-23
Procedure:
Entering the details in Advanced Active Directory Settings Page
1. Click on Advanced Settings to open the Advanced
Active Directory Settings Page.
Figure 4-16. FAdvanced Active Directory Settings Page
2. In the Active Directory Settings Page, enter the following
details.
3. Active Directory Authentication: To enable/disable
Active Directory, check or uncheck the Enable checkbox
respectively.
4. Specify the Domain Name for the user in the User
Domain Name field. e.g. MyDomain.com
5. Specify the time (in seconds) to wait for Active Directory
queries to complete in the Time Out field.
Role Group ID
The name that identifies the role group in the
Active Directory.
 Role Group Name is a string of 255 alpha-
numeric characters.
 Special symbols hyphen and underscore are
allowed.
Group Name
This name identifies the role group in Active
Directory.
 Role Group Name is a string of 255 alpha-
numeric characters.
 Special symbols hyphen and underscore are
allowed.
Group Domain
The domain where the role group is located.
Note:
 Domain Name is a string of 255 alpha-
numeric characters.
 Special symbols hyphen, underscore and dot
are allowed.
Group Privilege The level of privilege to assign to this role group.
Add Role Group To add a new role group to the device.
Modify role Group
To modify that role group. Alternatively, double
click on the configured slot.
Delete Role Group To delete an existing Role Group.
Table 4-19: Active Directory Settings Page (Continued)
I
TEM DESCRIPTION
Note:
If you have enabled Active Directory Authentication, enter the
required information to access the Active Directory server.
Note:
 Default Time out value: 120 seconds.
 Range from 15 to 300 allowed.

QUANTA STRATOS S210 Series S210-X22RQ Specifications

General

Brand	QUANTA
Model	STRATOS S210 Series S210-X22RQ
Category	Network Storage Server
Language	English