98 Chapter 3 Administrative Tasks
Note: Please note that you must us a PCMCIA card that is formatted in FAT16
filesystem. If you use an card that is formatted in FAT32, the 882 will not boot.
b.
c. Transfer the new release files (System and Library directories) to the PC card.
d. Remove the PC card from your PC and insert into the generator’s PC card slot.
3. If your PC does not have access to a PCMCIA slot or device, use the following
procedure. You can skip this step if you performed Step 2 above.
a. Access the generator’s main web page. For details on this, see “To connect directly
to the generator:” on page 104.
b. Access the generator’s FTP browser by choosing the FTP Browser menu item
from the generator’s main web page. The Generator FTP Browser appears. The
To Next Page
Loading...
