2 Chapter 11 Testing EDID for HDMI
Overview
This chapter provides procedures for testing EDID generation, emulating and handling.
The 882 can be configured to:
• emulate an HDMI, DVI, or VGA source device to test an HDMI, DVI, or VGA sink
(display) device.
With the 882, you can both view EDID from a display, and write EDID to a display device
(with writable EEPROM). In addition, you can test a display device’s EDID structure and
transmission in accordance with the HDMI Compliance Test Specification 1.2.
Additional EDID tests require the analyzer option. These include testing the EDID handling
capabilities of a source device, and the HDMI compliance EDID testing for a sink (display)
device.
To Next Page
Loading...
