882 Video Test Instrument User Guide (Rev A.35) 685
10242 Invalid font character range
The first or last character number setting of the font in the edit buffer is greater than the
maximum supported by the current firmware or the number of the first character is greater
than the number of the first character.
10300 CEC receive bit error
The generator encountered a CEC receive bit error condition.
10301 CEC receive time error
The generator encountered a CEC receive time error condition.
10302 CEC receive FIFO error
The generator encountered a CEC receive FIFO error condition.
10303 CEC receive start error
The generator encountered a CEC receive start error condition.
10304 CEC receive drop error
The generator encountered a CEC receive drop error condition.
10305 CEC receive free error
The generator encountered a CEC receive free error condition.
10310 CEC transmit line error
The generator encountered a CEC transmit line error condition.
10311 CEC transmit arb lost
The generator encountered a CEC transmit arb lost error condition.
10312 No acknowledgement from receiver
Upon sending a CEC message from the command line, the target CEC device does not
acknowledge the message.
10313 CEC transmit failed
The generator encountered a CEC transmit failed condition.
10320 CEC message error
The generator encountered a CEC message error condition.
To Next Page
Loading...
