Quantum Data 881 User Manual

882 Video Test Instrument User Guide (Rev A.35) 133
To enable DHCP for auto IP address configuration of the 882:
1. Press the Tools key. The Tools menu appears on the 882’s display as shown below.
2. Choose the System item by pressing the adjacent soft key. The System menu appears
on the 882’s display as shown below.
3. Choose the Network item by pressing the adjacent soft key. The 882’s IP address and
subnet mask appear on the 882’s display as shown below.
4. Press the Settings key. The Network Connection screen appears on the 882’s display
as shown below.
If the DHCP configuration option is not visible, press the soft key adjacent to the arrow
symbol by SubnetMask or IP Address until the DHCP configuration screen appears.
5. Change the setting to YES by pressing the + key.
System
Sequence
Probe
AFC
Analyzer
Reports
ImgShift
CEC
*Clock Clone
CalFactor Server
Network About
Serial Gpib
IP Address
192.168.254.1
Subnet Mask
255.255.255.000
Network Connection
Set TCP/IP
IP Address
206.135.215.168
Network Connection
TCP/IP
NO
DHCP Enabled
Network Connection
TCP/IP
YES
DHCP Enabled

Quantum Data 881 Specifications

General

Brand	Quantum Data
Model	881
Category	Portable Generator
Language	English