156 Chapter 5 Working with Formats
To view a format’s parameters on a display connected to the generator:
1. Press the Source key and choose a format by pressing the adjacent soft key.
2. Press the Content key and choose the Format image. The format parameters appear
on the connected display.
To view format parameters for all formats in the Source list:
1. Display the Format image as described above.
Encoding DAST, NDAS, NDAC, NBPA
Components DAXG, DAXA
Mix SDMG, DADG, DALS
Channels DACA, DACG
Audio Timing Sampling Rate ARAT, BRAT
Parameter Class Parameter Type Parameters
To Next Page
Loading...
