882 Video Test Instrument User Guide (Rev A.35) 37
1. Establish a session with the 882 using either HyperTerminal over a serial connection or
Telnet over an Ethernet LAN. See “Establishing a terminal session with the 882” on
page 30 or “Establishing a Telnet session with the 882” on page 33.
2. Enter the following command:
USRA username.xml
USRU username.xml
Note: A user name is 8 alphanumeric characters.
For example, to set up a user profile called “User3,” enter:
USRA User3.xml
USRU User3.xml
A new user profile is created with default configuration settings and becomes the active
profile on the 882. While active, the 882 tracks subsequent format and format options,
format catalogs, interface, and content selections made by the user. These configuration
settings are saved to the active profile when a different user profile is chosen on the 882.
To delete a user profile:
1. Enter the following command:
USRK username.xml
For example to delete User5, enter:
USRK User5.xml
To Next Page
Loading...
