242 Appendix A Command Reference
CPTX:CPTU
Initiates the running of an HDCP compliance test
Class HDCP Compliance
Description Actually initiates the running of an HDCP compliance tests through the command line.
This command is used with the CPTX:CPTR command which specifies which test should
be run.
Command syntax CPTX:CPTU
Other required
commands
The CPTX:CPTR command specifies which HDCP test to run.
Example 1
CPTX:CPTR 1 // Sets up the generator to run the 1A-01 test
CPTX:CPTU // Initiates the test specified with the CPRT command
Example 2
CPTX:CPTR 46 // Sets up the generator to run all HDCP test
CPTX:CPTU // Initiates the test specified with the CPRT command
To Next Page
Loading...
