244 Appendix A Command Reference
CPTX:DUTT
Specifies the device type for an HDCP compliance
test
Class HDCP Compliance
Description Specifies which type of device that you will run an HDCP compliance test on. This is one
of the Product Capabilities Parameters (PCP).
Command syntax CPTX:DUTT device
device
0 = Sink
1 = Source
2 = not used
3 = Repeater A/B
4 = Repeater 3C
Query syntax CPTX:DUTT?
Query response 0 through 4
Example
CPTX:DUTT 1 // Specifies that an HDCP compliance test on a Source
will be run
To Next Page
Loading...
